Firewall
Port forwarding rules
Digi Connect EZ Mini User Guide
476
n
A white list of devices, based on either IP address or firewall zone, that are authorized to
leverage this forwarding rule.
To configure a port forwarding rule:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Firewall
>
Port forwarding
.
4. For
Add port forward
, click
.
The port forwarding rule configuration window is displayed.
Port forwarding rules are enabled by default. To disable, click to toggle off
Enable
.
5. (Optional) Type a
Label
that will be used to identify the rule.
6. For
Interface
, select the network interface for the rule.
Network connections will only be forwarded if their destination address matches the IP
address of the selected network interface.
7. For
IP version
, select either
IPv4
or
IPv6
.
Network connections will only be forwarded if they match the selected IP version.
8. For
Protocol
, select the type of internet protocol.
Network connections will only be forwarded if they match the selected protocol.
9. For
Incoming port(s)
, type the public-facing port number that network connections must use
for their traffic to be forwarded.
10. For
To Address
, type the IP address of the server to which traffic should be forwarded.
