Configuration and management
Change the default password for the admin user
Digi Connect EZ Mini User Guide
38
Feature
Configuration
Security policies
n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
l
Enabled for local administration
l
Firewall zone: Set up
Monitoring
n
Device heath metrics uploaded to Digi Remote Manager at 60 minute
interval.
n
SNMP: Disabled
Change the default password for the admin user
The unique, factory-assigned password for the default
admin
user account is printed on the bottom
label of the device and on the loose label included in the package.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin
user will revert to the original, factory-assigned default password.
To change the default password for the admin user:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Authentication
>
Users
>
admin
.
4. Enter a new password for the admin user. The password must be at least eight characters long
and must contain at least one uppercase letter, one lowercase letter, one number, and one
special character.