DH Instruments COMPASS FOR MOLBOX, User Manual

Page: 148 / 226

COMPASS

for molbox™ User’s Manual
© 1998-2003 DH Instruments, Inc .
Page 134
11.9 [DISPLAY] TAB AND [DISPLAY] MENU
The [Tools] , [Options] , [Display] tab is used to set user preferences affecting the default COMPASS
display for each run mode (see Section 6.7). Regardless of the default selections chosen, all available
run screens can be repositioned and scaled as desired during any run mode. This tab also provides the option
to remove unwanted displays. The purpose and operation of
[Display] tab functions are described in Table 50.
The list of available displays is created using [Display][Save Custom Display As] during [Run DUT],
[Run molbox] and [Run Test] run modes (see Section 7). While running, use the <Run Toolbar> to
open the desired run screens. Position and size the run screens to any preferred configuration (see
Section 6.5). Then select the
[Display][Save Custom Display As] menu option and enter a name that
easily identifies the current screen configuration. All saved displays are available for instantaneous use
by selecting the
[Display][Select Custom Display] menu.
Since not all run screens are available in each run mode, it is best to select default displays created
during the run mode. This will insure that the default display selected will arrange the run screens
as expected.
Figure 76. [Options], [Display] Tab