DH Instruments COMPASS FOR MOLBOX, User Manual

Page: 73 / 226

COMPASS

for molbox™ User’s Manual
Page 59
© 1998-2003 DH Instruments, Inc .
7.2.2.1 MANUAL ENTRY DATA ACQUISITION
When the reference or any portion of the required DUT data requires manual entry,
the
<Manual Entry> window displays to allow the necessary data entry. A unit
of measure appears next to each entry field. It is critical that all entries be made
in the specified unit of measure. Failure to due so will result in erroneous data.
This feature is functionally equivalent to clicking the
<Enter Flow Data> icon on
the <Control Toolbar> (see Section 6.6.9). Manual entry of pressure and
temperature data for density correction DUTs (see Section
8.5.3
) can be streamlined
by using the appropriate [Tools] , [Options] , [Run Test] tab selection (see Section 11.6).
Figure 34. <Manual DUT Data Entry> Panel
7.2.3 TEST CONCLUSION
After run test is complete (see Section 7.2.2), test conclusion begins. Other than the repeat
point option, there are two main steps to the test conclusion.
•
Test Notes: The <Test Notes> pop-up appears to allow the user to enter notes
concerning the test run that has just completed. The notes are included in the Data File
and can be used in reports. In multi-cycle tests, only one display for the test notes occurs.
The test notes step can be skipped by selection in the
[Tools] , [Options] , [End Test] tab
(see Section 11.7).
•
Test Complete Screen: If the auto generate report option is selected on the [Tools] ,
[Options] , [End Test] tab (see Section 11.7), the current report template is used to
generate a report with the test Data File. Regardless of this selection, the <Test
Complete> screen displays with the name and path of the test Data File and offers
various post test options. Operation always returns to the <Test Complete> screen until
<Exit Test> has been selected.
Table 14 lists the <Test Complete> options.
Figure 35. <Test Complete> Panel