DH Instruments COMPASS FOR MOLBOX, User Manual

Page: 126 / 226

COMPASS

for molbox™ User’s Manual
© 1998-2003 DH Instruments, Inc .
Page 112
Figure 64. Hardware Definition, <Edit Power Supply> Panel
Table 38. Hardware Definition, <Edit Power Supply> Screen Fields
FEATURE DESCRIPTION
Manufacturer
(required text
entry field)
Labels the device manufacturer. Write in a manufacturer name.
Model
(required text
entry field)
Defines the device model. Write in a model name.
Serial Number
(required text
entry field)
Defines the device serial number. Write in a serial number.
Identification
(optional text
entry field)
Provides a device identification. Write in a device identification, if desired. The field
can be used for internal device tracking or any other information desired. The value
entered will be included in run test Data Files and can be included in reports.
Do not use the following characters: \,/, :, *, ?, “, <,>, |, a comma or tab
character. These characters will cause problems when importing the Data File
or creating the Data File directory based on the data directory naming
convention selected using the [Tools], [Options], [Data File] tab (see Section
11.8).
Calibration
Date
(optional text
entry field)
The value entered should represent the next required calibration date for
the device. No special formatting is expected or checked in this field, however,
entering the date in a consistent format including the full year, month and day is
recommended. The value entered is logged in the run test Data Files and can
be included in reports.