DH Instruments COMPASS FOR MOLBOX, User Manual

Page: 92 / 226

COMPASS

for molbox™ User’s Manual
© 1998-2003 DH Instruments, Inc .
Page 78
8.5.9 [SET] TAB
The DUT Definition [Set] tab defines how COMPASS is to set flow when running test on DUTs
that are set up as flow controllers in the DUT Definition [Range] tab (see Section 8.5.4). If the
DUT is NOT set up as a flow controller, the [Set] tab is not active. If the DUT is NOT a flow
controller, flow may be set manually or by a flow controlling device specified in the Test
Definition
[CONTROL] table (see Section 9.5.6).
Choose the manner in which set point commands are given from the <Set Point Type> list.
The set point to flow output relationship defined in the DUT Definition [Range] tab (see
Section 8.5.4) is used to convert set point values to the necessary set point units.
Table 23 provides information on the individual fields of the [Set] tab.
Figure 46. DUT Definition Editor, [Set] Tab