DH Instruments COMPASS FOR MOLBOX, User Manual

Page: 67 / 226

COMPASS

for molbox™ User’s Manual
Page 53
© 1998-2003 DH Instruments, Inc .
Figure 28. <Select molbloc> Panel
7.2.1.3 SELECT DUT
The DUT Definition selection tool is presented allowing browsing of DUT
Definitions available and selection of the DUT to run (see Section 8). If this step
is turned OFF (see Section 11.2), the screen is not shown and the last DUT
Definition used or accessed is automatically selected.
DUTs are listed by manufacturer, model, serial number, identification and record label.
The list is sorted according to the most recently selected sort order. Use your
keyboard’s arrow keys or pointing device to highlight the desired DUT. The highlighted
DUT record label is listed at the bottom of the display. To select a DUT from the DUT list,
double click on the desired listing or press
<OK> while the listing is highlighted.
Click <View Selection> to display the current selection or <Cancel> to quit.
Figure 29. <DUT Selection> Tool
The current selection is viewed using the <View Selection> button. This causes
the DUT Definition Editor to display with the selected DUT loaded. The DUT
cannot be modified using this pop-up, but all the characteristics can be viewed by
clicking on the appropriate tabs. Other DUTs can be viewed using the DUT
Definition Editor’s DUT selection options (see Section 8.4). When the desired
DUT is selected, click the
<OK> button in the Editor to accept the selection.
Closing the Editor window using the control box <X> is equivalent to a cancel.