Technical Description
HyCassette-Geko
30
PR-2015-0159-GB • Subject to modifications • R1-11/2015
2.9.4 “Operating mode” menu setting
Four menu options are available in the "Operating mode" menu. The menu is pre-
set with "normal mode” as factory setting.
If the Economy/Standby mode is externally specified, e.g. with a MATRIX.OP71
or a building control system, then bypass operation can be activated with the con-
trol panel. With activation of bypass operation for an adjustable time X, the econ-
omy mode or standby operation is bridged and the normal operation is activated
(operating time extension).
Normal mode
Economy mode
Clock timer
Preference
Operating mode
Menu
option
Display
Explanation
1
Normal opera-
tion
The control system works with the setpoints for
the normal mode (day operation).
2
Economy
mode
The control system works with the set setpoints
for the economy mode (night operation).
3
Clock timer
Switch-over between normal and economy oper-
ation is performed according to setting of clock
timer (timer programme).
4
Preference
The next switching moment takes preference
once. Further operation is performed in the pre-
set switching times. If the time program has acti-
vated the economy mode, normal operation can
be activated with the menu item "Preference".
This operation state remains enabled until the
next switching point for the economy mode.
Bypass
Operating mode
NOTICE!
If the economy mode is activated, the setpoint values parameterized for the
economy mode are shown.
This means that the setpoint displays switch from the normal controller param-
eters to the economy mode controller parameters. The displayed setpoint val-
ues of the economy mode can be changed analogous to the setpoint values of
the normal operation.
