Technical Description
HyCassette-Geko
32
PR-2015-0159-GB • Subject to modifications • R1-11/2015
2.9.6.2 Operation mode "Manuel"
In "Manual" mode the user can change the direction of discharge and air throw of
cold or warm air independently of the HVAC mode (heating or cooling). The air
passes parallel to the ceiling on the right side of the scale, and the air is
discharged vertically downwards on the left side of the scale. Towards the center
the air throw decreases.
2.9.6.3 "Turbo" operating mode
The "Turbo" operating mode is only available in normal operation for a limited
time. To enable a fast temperature change in the room, the air is blown deep into
the room during "Turbo" operating mode (which can possibly cause a loss in
comfort). Therefore the fan speed is set to maximum speed regardless of the fan
speed setting. The user can adjust the duration between 1 and 60 minutes. When
using the "Turbo" operating mode for the first time, the factory setting showing 10
minutes is displayed. For each further use, the last set time is specified. The
remaining time is shown on the home screen in hours and minutes (format
hh:mm). When the predetermined time has expired, the last operating mode
settings are restored.
Room air flow
Automatic
Manual
Turbo
Breath
Room air flow
NOTICE!
The graphic representation of the SWIRL® setting (see figure) shows the set-
point of the direction of discharge but not the actual value.
The setting of the SWIRL® outlet has an influence on the unit's acoustics. The
unit operates the most quietly in middle position.
Room air flow
Automatic
Manual
Turbo
Breath
Room air flow
Automatic
Manual
Turbo
Breath
60 min
00:09
NOTICE!
The "Turbo"operating mode enables rapid changing of the room temperature to
reach the new temperature setpoint. A conference room, for example, can be
brought to a comfortable temperature before a meeting within a short time.
