HyCassette-Geko
Mounting
PR-2015-0159-GB • Subject to modifications • R1-11/2015
53
Mounting design panel SWIRL®
•
Mount the cover using the snares on the basic unit the
way that the cover hangs down vertical. The snares
are important for subsequent cleaning work!
•
Thread both cover cables through the ceiling opening
and stick them in sideways into the switch box. The
plugs fit only when in the correct position in the right
socket.
•
Put on the cover from below and fasten the design
panel with the 5 screws (Fig. 4-19, pos. 2) to the unit
on the provided threaded bushings. Make sure the
snares are pushed to the side and out of the unit into
the false ceiling.
•
Place the suction grill back on by twisting it slightly to
the right (clockwise movement) and fixing it in place
with the white screw
(Fig. 4-17)
Pos. 1:
Knurled nuts
Pos. 2:
Screws (5 pcs)
Fig. 4-19: Mounting the design panel SWIRL®
1
2
