Dell PowerConnect W-IAP175P, User Manual

Page: 84 / 158

84
| Authentication
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0
| User Guide

Tunnel-Medium-Type

Tunnel-Preference

Tunnel-Private-Group-Id

Tunnel-Server-Auth-Id

Tunnel-Server-Endpoint

Tunnel-Type

User-Category

User-Name

User-Vlan

Vendor-Specific
Management Authentication Settings
To authenticate the Virtual Controller Management in the Instant UI, perform the following steps:
1. Click the Settings link.
2. Select the Admins tab.
3. In the Authentication drop-down list, select any one of the following:

Internal —Select the Username and Password specified in the respective text boxes to access the Virtual
“Configuring an External RADIUS Server” on page 79 Management UI.

RADIUS Server —Specify one or two radius servers to authenticate UI. If two servers are configured users can
use them in primary/backup mode or load-balancing mode, this is identical to the radius server configuration
for SSIDs. For information on configuring external RADIUS server, see
“External RADIUS Server” on
page 78 .

RADIUS server w/ fallback to internal —Specify the radius servers as well as a Username and Password. If
there is no response from the RADIUS server (RADIUS server timeout), the authentication will switch to
“Internal”.
Figure 65
Management Authentication Settings
4. Click OK .