Dell PowerConnect W-IAP175P, User Manual

Page: 108 / 158

108
| Instant Firewall
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0
| User Guide
Figure 83
Defining Rule—Deny FTP Service Except to a Particular Server
Deny bootp service except to a particular network
1. Click the New link in the Networks tab.
To define the access rule to an existing network, click the network. The edit link appears. Click the edit link
and navigate to the Access tab.
2. In the Basic Info tab, enter the appropriate information.
3. Click Next and set appropriate security levels using the slider button in the Security tab.
4. Click Next . The Access tab appears. The Allow any to all destinations access rule is enabled by default. This
rule allows traffic to all destinations. To define deny bootp service access rule except to a network, perform the
following steps:
1. Click
New, the New Rule box appears.
2. Select Deny from the Action drop-down list.
3. Select bootp from the Service drop-down list.
4. Select except to a network from the Destination drop-down list.

Enter appropriate IP address in the IP text box.

Enter appropriate netmask in the Netmask text box.
5. Click OK .
5. Click Finish .