66
| Managing IAPs
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0
| User Guide
Configuring Adaptive Radio Management
Adaptive Radio Management (ARM) is enabled in Dell Instant by default. However, if ARM is disabled, perform
the following steps to enable it. For more information about ARM, see
“Adaptive Radio Management” on
page
115
.
1. In the
Access Points
tab, click the IAP for which you want to configure ARM. The
edit
link appears.
2. Click the
edit
link. An
Edit AP
box appears.
3. In the
Edit AP
box, click the
Radio
tab.
4. Select
Adaptive radio management assigned
.
Figure 49
Configuring IAP Radio Settings Mode—Access
5. Click
OK.
Migrating from a Virtual Controller Managed Network to Mobility Controller Managed Network
An IAP can be provisioned as a Campus AP in a controller-based network, but a Campus AP cannot be
provisioned as an IAP. Before converting the IAP, ensure that both the IAP and controller are configured to
operate in the same regulatory domain. The reset button located on the rear of an IAP can be used to reset the
IAP to factory default settings. If you have converted your IAP to a campus AP, pressing the reset button converts
it back to an IAP. The IAP will then boot with the factory default image. Refer to the Dell PowerConnect
W-IAP92/93/105 Instant Access Point Installation Guide
for details.
Summary of Contents for PowerConnect W-IAP175P
