manualshive.com logo in svg

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Share
Download
Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 94

94

Securing Your Computer

• Contact Dell customer service to report the missing computer. Provide the 

computer Service Tag, the case number, and the name, address, and phone 

number of the law enforcement agency to which you reported the missing 

computer. If possible, give the name of the investigating officer.

The Dell customer service representative will log your report under the 

computer Service Tag and record the computer as missing or stolen. If someone 

calls Dell for technical assistance and gives your Service Tag, the computer is 

identified automatically as missing or stolen. The representative will attempt to 

get the phone number and address of the caller. Dell will then contact the law 

enforcement agency to which you reported of the missing computer.

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands