Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 195

Page: 195 / 218

Getting Help

195

[email protected] (Latin America and Caribbean countries only)
[email protected]

(Asian/Pacific countries only)

• Dell Marketing and Sales e-mail addresses

[email protected]

(Asian/Pacific countries only)

[email protected] (Canada only)

• Anonymous file transfer protocol (FTP)

ftp.dell.com

anonymous

, and use your e-mail address as your password.

AutoTech Service

Dell's automated support service—AutoTech—provides recorded answers to

the questions most frequently asked by Dell customers about their portable

and desktop computers.
When you call AutoTech, use your touch-tone telephone to select the

subjects that correspond to your questions. For the telephone number to call

for your region, see "Contacting Dell" on page 199.

Automated Order-Status Service

To check on the status of any Dell products that you have ordered, you can go

support.dell.com

or you can call the automated order-status service. A

recording prompts you for the information needed to locate and report on

your order. For the telephone number to call for your region, see "Contacting

Dell" on page 199.

Problems With Your Order

If you have a problem with your order, such as missing parts, wrong parts, or

incorrect billing, contact Dell for customer assistance. Have your invoice or

packing slip handy when you call. For the telephone number to call for your

region, see "Contacting Dell" on page 199.

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands