Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 139

Page: 139 / 218

Reinstalling Software

139

Reinstalling Software

Drivers

What Is a Driver?

A driver is a program that controls a device such as a printer, mouse, or

keyboard. All devices require a driver program.
A driver acts like a translator between the device and any other programs that

use the device. Each device has its own set of specialized commands that only

its driver recognizes.
Dell ships your computer to you with required drivers already installed—no

further installation or configuration is needed.

NOTICE:

The

Drivers and Utilities

media may contain drivers for operating systems

that are not on your computer. Ensure that you are installing software appropriate

for your operating system.

Many drivers, such as the keyboard driver, come with your Microsoft Windows

operating system. You may need to install drivers if you:

• Upgrade your operating system.
• Reinstall your operating system.
• Connect or install a new device.

Identifying Drivers

If you experience a problem with any device, identify whether the driver is the

source of your problem and, if necessary, update the driver.

Microsoft

Windows

Click

Start

→

Control Panel

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands