manualshive.com logo in svg

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Share
Download
Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 174

174

Adding and Replacing Parts

4

Pull the device out of the media bay.

To install a device, push the new device into the bay until it clicks into place.

FCM (Flash Cache Module)

The FCM, or Flash Cache Module, is an internal flash drive that helps improve 

the performance of your computer. 

 

NOTE: 

This card is only compatible with the Microsoft Windows Vista® operating 

system.

 

NOTE: 

If you ordered a FCM card with your computer, the card is already 

installed

.

1

Follow the procedures in "Before You Begin" on page 149. 

2

Remove the hinge cover (see "Hinge Cover" on page 152).

3

Remove the keyboard (see "Keyboard" on page 153).

4

Ground yourself by touching one of the metal connectors on the back of 

the computer. 

 

NOTE: 

If you leave the area, ground yourself again when you return to the 

computer. 

5

Slide the antenna cables out of the protective sleeve and away from the 

top of the FCM card.

6

Release the card by pushing the metal securing brackets away from the 

card until the card pops up slightly.

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands