manualshive.com logo in svg

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Share
Download
Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 201

Appendix

201

21

Appendix

FCC Notice (U.S. Only)

FCC Class B

This equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the manufacturer’s instruction 

manual, may cause interference with radio and television reception. This 

equipment has been tested and found to comply with the limits for a Class B 

digital device pursuant to Part 15 of the FCC Rules. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

1

This device may not cause harmful interference. 

2

This device must accept any interference received, including interference 

that may cause undesired operation. 

 

NOTICE: 

The FCC regulations provide that changes or modifications not expressly 

approved by Dell Inc. could void your authority to operate this equipment. 

These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does 

cause harmful interference with radio or television reception, which can be 

determined by turning the equipment off and on, you are encouraged to try to 

correct the interference by one or more of the following measures: 

• Reorient the receiving antenna.
• Relocate the system with respect to the receiver.
• Move the system away from the receiver.
• Plug the system into a different outlet so that the system and the receiver 

are on different branch circuits. 

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands