manualshive.com logo in svg

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Share
Download
Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 163

Adding and Replacing Parts

163

5

Replace the cover.

 

NOTICE: 

If the cover is difficult to close, remove the module and reinstall it. Forcing 

the cover to close may damage your computer.

6

Insert the battery into the battery bay, or connect the AC adapter to your 

computer and an electrical outlet.

7

Turn on the computer.

As the computer boots, it detects the additional memory and automatically 

updates the system configuration information.
To confirm the amount of memory installed in the computer, click 

Start

→ 

Help 

and Support

, and then click 

Computer Information

.

8

Replace the memory module cover.

Wireless Local Area Network (WLAN) Card

If you ordered a WLAN card with your computer, the card is already installed.

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

1

Follow the procedures in "Before You Begin" on page 149.

2

Remove the hinge cover (see "Hinge Cover" on page 152).

3

Remove the keyboard (see "Keyboard" on page 153).

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands