manualshive.com logo in svg

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Share
Download
Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 164

164

Adding and Replacing Parts

 

NOTICE: 

To prevent damage to the connector, do not use tools to spread the 

securing clips. 

4

If a WLAN card is not already installed, go to step 5. If you are replacing a 

WLAN card, remove the existing card:

a

Disconnect the WLAN card from any attached cables.

b

Use your fingertips to carefully spread apart the metal securing tabs 

until the card pops up slightly.

c

Slide and lift the WLAN card out of its connector.

 

NOTICE: 

The connectors are keyed to ensure correct insertion. If you feel 

resistance, check the connectors and realign the card.

 

NOTE: 

Do not insert a Mobile Broadband card into the WLAN card slot.

 

NOTE: 

The WLAN card may have two or three connectors, depending on the type 

of card you ordered.

1

WLAN card

2

antenna cables (2)

2

1

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands