Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 162

Page: 162 / 218

162

Adding and Replacing Parts

NOTICE:

Insert memory modules at a 45-degree angle to avoid damaging the

connector.

Ground yourself and install the new memory module:

NOTE:

If the memory module is not installed properly, the computer may not boot

properly. No error message indicates this failure.

Align the notch in the module edge connector with the tab in the

connector slot.

Slide the module firmly into the slot at a 45-degree angle, and rotate

the module down until it clicks into place. If you do not feel the click,

remove the module and reinstall it.

securing clips (2 per connector)

memory module

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands