manualshive.com logo in svg

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Share
Download
Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 56

56

Using the Display

The ambient light sensor is disabled when your computer is shipped to you. If 

you enable the ambient light sensor and then use any of the display brightness 

key combinations, the ambient light sensor is disabled and the display 

brightness is increased or decreased accordingly. 

 

NOTE: 

The ambient light sensor is disabled when your computer is connected to 

an electrical outlet.

Dell™ QuickSet allows you to enable or disable the ambient light sensor. You 

can also adjust maximum and minimum brightness settings that are activated 

when you enable the ambient light sensor feature. For more information about 

QuickSet, right-click the 

 icon in the taskbar, and click 

Help

.

 

NOTE: 

Rebooting the computer returns the ambient light sensor to the last setting 

of enabled or disabled. 

 

NOTE: 

The ambient light sensor adjusts the display backlighting on your portable 

computer only. It does not control the brightness on any external monitors or 

projectors.

1

ambient light sensor

1

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands