Dell D630 - LATITUDE ATG NOTEBOOK User Manual Download Page 51

Page: 51 / 218

Using the Keyboard

Microsoft

Windows

Logo Key Functions

To adjust keyboard operation, such as the character repeat rate, open the

Control Panel, click

Printers and Other Hardware

, and click

Keyboard

. For

information about the Control Panel, access the Help and Support Center (click

Start

→

Help and Support

Touch Pad

The touch pad detects the pressure and movement of your finger to allow you to

move the cursor on the display. Use the touch pad and touch pad buttons as you

would use a mouse.

Windows logo key and <m>

Minimizes all open windows.

Windows logo key and <Shift><m> Restores all minimized windows. This key

combination functions as a toggle to restore

minimized windows following the use of the

Windows logo key and <m> key combination.

Windows logo key and <e>

Runs Windows Explorer.

Windows logo key and <r>

Opens the

Run

dialog box.

Windows logo key and <f>

Opens the

Search Results

dialog box.

Windows logo key and <Ctrl><f>

Opens the

Search Results-Computer

dialog box (if

the computer is connected to a network).

Windows logo key and <Pause>

Opens the

System Properties

dialog box.

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK



























































































































































































































Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands

Dell D630 - LATITUDE ATG NOTEBOOK, User Manual

Search results

Summary of Contents for D630 - LATITUDE ATG NOTEBOOK

Reviews:

Brands by name

Popular brands