Dell Command Line Interface, User Manual

Page: 88 / 226

88
omconfig: Managing Components Using the Instrumentation Service
When you type
omconfig preferences snmp setting=rootpw
, the system prompts you to
supply values for the required parameters.
When you type
omconfig preferences snmp
, you must supply all of the parameters in the initial
command line. For example:
omconfig preferences snmp setting=rootpw oldpw=openmanage newpw=
serveradmin confirmnewpw=serveradmin
Table 4-18. SNMP Set Operations Parameters
For example, to disallow SNMP Set Operations use the command:
omconfig preferences snmp setting=snmpset enable=false
NOTE:
After executing the command to enable or disable SNMP Set Operations, restart services for the change to
take effect. On systems running supported Microsoft Windows operating systems, restart the Windows SNMP
Service. On systems running supported Red Hat Enterprise Linux and SUSE Linux Enterprise Server operating
systems, restart Server Administrator services by running the
srvadmin-services.sh restart
command.
omconfig preferences useraccess
Depending on the policies of your enterprise, you may want to restrict the access that some user levels
have to Server Administrator. The
omconfig preferences useraccess command allows you to grant or
withhold the right of Users and Power Users to access Server Administrator.
Table 4-19 shows the valid parameters for the command.
Table 4-17. SNMP Root Password Parameters
name=value pair Description
setting=rootpw Required.
oldpw=<
oldpassword
> Enter the old SNMP root password.
newpw= <newpassword> Sets the new SNMP root password.
confirmnewpw=< newpassword > Confirms the new SNMP root password.
name=value pair Description
setting=snmpset Required
enable=true Allows SNMP Set Operations
enable=false Disallows SNMP Set Operations