Dell Command Line Interface, User Manual

Page: 120 / 226

120
omconfig rac: Managing the Remote Access Controller
Table 7-1 is a high-level summary of the omconfig rac command. The column titled "Command level 3"
lists the major arguments that can be used with omconfig rac . "User privilege required" refers to the type
of privilege you need to execute the command, where U=User, P=Power User, and A=Administrator.
"Use" is a very general statement about the actions that can be performed using
omconfig rac.
More details about syntax and use of the command appear later in this section.
Table 7-1. Command Level 1, Command Level 2, and Command Level 3 Options for omconfig rac
Command
level 1 Command
level 2 Command
level 3 User
privilege
required Use
omconfig
rac
authentication A Sets authentication properties.
dialinusers A Sets dial-in user properties.
dialoutusers A Sets dial-out user properties.
generatecert A Generates an certificate signing request (CSR).
modem A Configures modem properties.
network A Configures network properties.
snmptraps A Sets SNMP trap properties.
remote A Configures remote features properties.
rmdialinuser A Removes the dial-in user.
rmdialoutuser A Removes the dial-out user.
rmsnmptrap A Removes the SNMP trap.
rmuser A Removes the user.
reset A Resets the RAC.
uploadcert A Uploads a server or CA certificate.
users A Sets user properties.