Dell Command Line Interface, User Manual

Page: 54 / 226

54
omconfig: Managing Components Using the Instrumentation Service
Help With the omconfig Command
Use the omconfig -? command to get a list of the available commands for omconfig .
Use omconfig <command level 2> -? to get help on the level 2 commands about , chassis , preferences ,
and system . The following information on omconfig system -? applies equally to getting help for the
omconfig chassis command.
Use the omconfig system -? command to get a list of the available commands for omconfig system .
Use the omconfig preferences -? command to get a list of the available commands for omconfig
preferences , such as cdvformat , which is the custom delimiter format (cdv ). Type the following
command to display the list of delimiter values for the cdv:
omconfig preferences cdvformat -?
Use a command of the form omconfig system <command level 3> -? to get a list of the parameters you
must use to execute a particular omconfig system command. For example, the following commands
produce a list of valid parameters for omconfig system alertaction and omconfig system shutdown :
omconfig system alertaction -?
omconfig system shutdown -?
In the case of the omconfig system alertaction command, you can use various options to prevent all of
the CLI help from scrolling by before you can read it.
memorymode A Enables or disables the spare bank and
mirroring memory modes, and also specify
which mode to use.
remoteaccess A Configures remote access information.
temps P, A Sets warning threshold values by default or
value.
NOTE:
You cannot change threshold values on
ESM3 and PowerEdge
x
8
xx
systems.
volts P, A Sets warning threshold values by default or
value.
NOTE:
You cannot change threshold values on
ESM3 and PowerEdge x 8 xx systems.
storage See "Using the Storage Management Service."
Table 4-1. omconfig Command Level 1, Level 2, and Level 3 (continued)
Command
level 1 Command
level 2 Command
level 3 User privilege
required Use