Dell Command Line Interface User Manual Download Page 58

Page: 58 / 226

omconfig: Managing Components Using the Instrumentation Service

attribute=ide

setting=on | off
force=true

: Enables this device.

off

: Disables this device.

force=true

: Verification of setting change.

attribute=idepridrv

setting=off | auto

off

: Disables the device.

auto

: Automatically detect and enable the device.

attribute=intrusion

setting=enable | disable

enable

: Enables the intrusion check during system

boot. If the system also has bezel intrusion
checking, then the intrusion option checks for
removal of the bezel of the system.

disable

: Disables the intrusion check during

system boot.

attribute=mouse

setting=on | off

: Enables the mouse.

off

: Disables the mouse.

attribute=nic1

setting=enabled | disabled
| enablednonepxe

enabled

: Enables the first NIC during system boot

(with PXE on if the system has PXE).

disabled

: Disables the first NIC during

system boot.

enablednonepxe

: Enables the first NIC during

system boot (with PXE off if the system has PXE).

attribute=nic2

setting=enabled | disabled
| enablednonepxe

enabled

: Enables the second NIC during system

boot (with PXE on if the system has PXE).

disabled

: Disables the second NIC during system

boot.

enablednonepxe

: Enables the second NIC during

system boot (with PXE off if the system has PXE).

attribute=numlock

setting=on | off

: Use the keypad as number keys.

off

: Use the keypad as arrow keys.

attribute=ppaddress

setting=off | lpt1 | lpt2 | lpt3

off

: Disable the parallel port address.

lpt1

: Locate the device on LPT1.

lpt2

: Locate the device onLPT2.

lpt3

: Locate the device on LPT3.

Table 4-2.

BIOS Setup

(continued)

name=value pair 1
attribute=

name=value pair 2
setting=

Description

Summary of Contents for Command Line Interface



































































































































































































































Search results

Summary of Contents for Command Line Interface

Reviews:

Related manuals for Command Line Interface

Brands by name

Popular brands

Dell Command Line Interface, User Manual

Search results

Summary of Contents for Command Line Interface

Reviews:

Related manuals for Command Line Interface

Brands by name

Popular brands