Dell Command Line Interface, User Manual

Page: 80 / 226

80
omconfig: Managing Components Using the Instrumentation Service
config=serialoverlan enable=true | false true : Enables serial over LAN for the BMC.
false : Disables serial over LAN for the BMC.
baudrate=9600 | 19200 | 38400 | 57600
| 115200 9600 : Sets the volatile and nonvolatile
connection speed to 9600 bits per second.
19200 : Sets the volatile and nonvolatile
connection speed to 19200 bits per second.
38400 : Sets the volatile and nonvolatile
connection speed to 38400 bits per second.
57600 : Sets the volatile and nonvolatile
connection speed to 57600 bits per second.
115200 : Sets the volatile and nonvolatile
connection speed to 115200 bits per second.
NOTE:
Baud rates of 9600 and 19200 are
supported on PowerEdge 1800, 1850, 2800, and
2850 systems.
Baud rates of 9600, 19200, and 57600 are
supported on PowerEdge
x 9 xx systems.
Baud rate of 115200 is supported on certain
systems that have a DRAC 5 installed.
privilegelevel=administrator | operator
| user administrator : Sets the maximum privilege
level that can be accepted on a serial over
LAN channel, to Administrator.
operator : Sets the maximum privilege level
that can be accepted on a serial over LAN
channel, to Operator.
user : Sets the maximum privilege level that
can be accepted on a serial over LAN channel,
to User.
config=settodefault Takes the default configuration settings.
config=terminalmode deletecontrol=outputdel |
outputbkspspbksp outputdel : BMC outputs a <del> character
when <bksp> or <del> is received.
outputbkspspbksp : BMC outputs a
<bksp><sp><bksp> character when
<bksp> or <del> is received.
Table 4-12. omconfig chassis remoteaccess (continued)
name=value pair 1
config= name=value pair 2 Description