Dell Command Line Interface, User Manual

Page: 63 / 226

omconfig: Managing Components Using the Instrumentation Service
63
config=nic
(continued)
nicselection=nic1 | teamednic1nic2 |
dracnic nic1: Enables NIC 1.
teamednic1nic2: Enables NIC teaming
functionality.
dracnic: Enables DRAC NIC if DRAC 5 is
installed.
NOTE:
The option nicselection is supported only
on PowerEdge
x
9
xx
systems.
NOTE:
If there are multiple embedded NICs on
your system, you can select the NIC teaming
option to share the BMC management traffic
between them.
privilegelevel=administrator | operator
| user administrator : Sets the maximum privilege
level that can be accepted on a LAN channel to
Administrator.
operator : Sets the maximum privilege level that
can be accepted on a LAN channel to Operator.
user : Sets the maximum privilege level that can
be accepted on a LAN channel to User.
subnet=Subnet subnet : Sets a subnet mask if you have selected
static as the IP address source for the BMC
LAN interface.
vlanenable=true | false true : Enables the virtual LAN identification.
false : Disables the virtual LAN identification.
vlanid=number number : Virtual LAN identification in the
range of 1 to 4094.
vlanpriority=number number : Priority of virtual LAN identification
in the range of 0 to 7.
Table 4-3. omconfig chassis bmc (continued)
name=value pair 1
config= name=value pair 2 Description