Dell Command Line Interface, User Manual

Page: 95 / 226

omconfig: Managing Components Using the Instrumentation Service
95
omconfig system events
Use the omconfig system events command to enable and disable SNMP traps for components on
your system.
NOTE:
Not all event types may be present on your system.
There are four parameters in the name=value pair component of the omconfig system events command:
• source
• type
• severity
• index
Source
At present,
source=snmptraps
is a required name=value pair because SNMP is currently the only
supported source of event notification for your system’s components.
omconfig system events source=snmptraps
Type
The event type refers to the name of the component(s) involved in the event. Table 4-25 shows the valid
parameters for system event types.
Table 4-25. System Event Type Parameters
name=value pair Description
type=accords Configures events for AC power cords.
type=battery Configures events for battery.
type=all Configures events for all device types.
type=currents Configures events for amperage.
type=fanenclosures Configures events for fan enclosures.
type=fans Configures events for fans.
type=intrusion Configures events for chassis intrusion.
type=log Configures events for logs.
type=memory Configures events for memory.
type=powersupplies Configures events for power supplies.
type=redundancy Configures events for redundancy.
type=temps Configures events for temperatures.
type=volts Configures events for voltages.