Dell Command Line Interface, User Manual

Page: 67 / 226

omconfig: Managing Components Using the Instrumentation Service
67
config=terminalmode deletecontrol=outputdel |
outputbkspspbksp outputdel : BMC outputs a <del> character
when <bksp> or <del> is received.
outputbkspspbksp : BMC outputs a
<bksp><sp><bksp> character when
<bksp> or <del> is received.
echocontrol=enabled | disabled enabled : Enables characters to be sent to the
screen.
disabled : Disables characters to be sent to the
screen.
handshakingcontrol=enabled | disabled enabled : Directs the BMC to output a character
sequence that indicates when its input buffer is
ready to accept another command.
disabled : Does not direct the BMC to output a
character sequence that indicates when its
input buffer is ready to accept another
command.
inputlinesequence=cr | null cr : The console uses <CR> as a new line
sequence.
null : The console uses <NULL> as a new line
sequence.
lineediting=enabled | disabled enabled : Enables line editing as a line is typed.
disable : Disables line editing as a line is typed.
newlinesequence=none | crlf | null | cr
| lfcr | lf none : BMC does not use a termination
sequence.
crlf : BMC uses <CR-LF> as a new line
sequence when the BMC writes a new line to
the console.
null : BMC uses <Null> as a new line sequence
when the BMC writes a new line to the console.
cr : BMC uses <CR> as a new line sequence
when the BMC writes a new line to the console.
lfcr : BMC uses <LF-CR> as a new line
sequence when the BMC writes a new line to
the console.
lf : BMC uses <LF> as a new line sequence
when the BMC writes a new line to the console.
Table 4-3. omconfig chassis bmc (continued)
name=value pair 1
config= name=value pair 2 Description