DayTronic 3500 Series, Instruction Manual

Page: 109 / 122

PRN [CMT]
Reads current PRINT ENABLE status. Returns ON [EOT] or OFF [EOT] .
RES RESPONSE
RES=f [CMT]
Sets the selectable analog filter corner to f Hz, where f = 5, 10, or 20 for the Model
3530 LVDT Conditioner , Model 3560 Voltage Conditioner , Model 3570 DC Strain
Gage Conditioner , and Model 3578 AC Strain Gage Conditioner . For the Model
3540 Frequency Conditioner , f = 2 (for 2.5), 5, or 10. Not recognized by the Model
3510 Thermocouple Conditioner . For RS-485 (only), returns ACK [EOT] .
RES [CMT]
Reads analog filter setting. Returns f [EOT] , except for the Model 3510 Thermocou-
ple Conditioner , which always returns 20 [EOT] .
RLS RELEASE
RLS [CMT]
Simultaneously releases both the HIGH-LIMIT LATCH and the LOW-LIMIT LATCH,
returning to a "live" state the logic output and front-panel indicator light associated
with each limit (see the
HIGH LATCH (HLA) and LOW LATCH (LLA) commands).
RNG RANGE
RNG=r [CMT]
Sets the input range (or unit scale) to r. For allowable "r" values for each conditioner
model, see the table in Section 3.b.4. For RS-485 (only), returns
ACK [EOT] .
RNG [CMT]
Reads current input-range setting. Returns r [EOT] .
SAV SAVE
SAV=ON [CMT]
Saves the existing setup configuration (including calibration data) to nonvolatile
EEPROM. For RS-485 (only), returns
ACK [EOT] .
[ NOTE: The SAV=OFF [CMT] command has no effect.]
SAV [CMT]
Reads "SAVE" status. Returns ON [EOT] when a "save" is currently in progress; other-
wise returns OFF [EOT] .
SCD SECURITY CODE
SCD=c [CMT]
Sets the security code to c (where 0
≤
c
≤
98). For RS-485 (only), returns ACK [EOT] .
SCD [CMT]
Reads current security code number. Returns c [EOT] .
SEN SENSITIVITY —
Model 3540 Frequency Conditioner only
SEN=s [CMT]
Sets the input sensitivity of the Model 3540 Frequency Conditioner to "s," where s = .1
(for 0.1 to 5 V), 1 (for 1 to 20 V), or 10 (for 10 to 100 V). For RS-485 (only), returns
ACK
[EOT] .
SEN [CMT]
Reads current input sensitivity setting. Returns s [EOT] .
B.9
C
OMMAND AND
R
ESPONSE
S
YNTAX
B
B.8 3500 M
NEMONIC
C
OMMANDS