DayTronic 3500 Series, Instruction Manual

Page: 113 / 122

Most of the following ERROR CODES refer to the INTERNAL LINEARIZATION pro-
cedure discussed in Section 4.c.4.
Error Display Meaning
Err1 Insufficient input error—i.e., the desired display resolution
is too great for the input change.
Err2 Table entry error; the entered "input" is within the end-
points of another segment.
Err3 While calculating the "b" term of the segment, an arith-
metic overrange has occurred in justifying the decimal
points.
Err4 The current range is not legal for this instrument. Re-
enter the range.
Err5 The engineering-unit "output" entered for the current seg-
ment is equal to that of the previous segment (resulting in
a slope of "0").
Err6 The "input" of the current segment is equal to that of the
previous segment.
Err7 The entered "input" has an incorrect precision.
C.1
T
ABLE OF
E
RROR
N
UMBERS
C
T
ABLE OF
E
RROR
N
UMBERS
Appendix C
Table of Error Numbers