![background image](http://html1.mh-extra.com/html/daikin/rx-w-series/rx-w-series_service-manual_3662825226.webp)
Field Settings for FDMQ, FFQ Series
SiUS092230EA
220
Part 7 Trial Operation and Field Settings
5.5 MAIN/SUB and Address Setting for Wireless Remote
Controller for FDMQ Series
Outline
If setting multiple wireless remote controllers to operate in one room, perform address setting
for the receiver and the wireless remote controller.
If using both a wired remote controller and a wireless remote controller with 1 indoor unit,
change the MAIN/SUB switch of the signal receiver PCB.
Signal Receiver
PCB Setting
MAIN/SUB switch
Set the MAIN/SUB setting switch (SS1) on the signal receiver PCB to SUB.
Wireless address switch
Set the address setting switch (SS2) on the signal receiver PCB according to the table below.
MAIN
SUB
MAIN/SUB setting
switch (SS1)
R7000181
R7000182
No.1
No.2
No.3
Address setting
switch (SS2)
R7000183
R7000184
R7000185
Setting the receiver
(lt is factory set to “1”)
Address setting switch (SS2)
MAIN/SUB setting switch (SS1)
(R24951)
M
S
M
S
1
2
3
1
2
3
1
2
3
Summary of Contents for RX-W Series
Page 1: ... Applied Models Inverter Pair Heat Pump Service Manual SiUS092230EA Inverter Pair RX W Series ...
Page 207: ...SiUS092230EA Check Part 6 Service Diagnosis 201 15 18 24 class R25105 1 2 3 4 Multimeter ...
Page 209: ...SiUS092230EA Check Part 6 Service Diagnosis 203 15 18 24 class R20704 W V U DC_P1 DC_N1 ...
Page 239: ...SiUS092230EA Piping Diagrams Part 8 Appendix 233 RX24WMVJU9 3D141502 ...