Daikin RX-W Series, Service Manual

Page: 202 / 247

Check SiUS092230EA
196 Part 6 Service Diagnosis
FTXR Series
1. Turn the power on.
2. Select FAN operation with the
Mode button on the remote controller.
3. Press the center of the Temp button and the Mode button at the same time.
4. Select T with the Temp

or Temp

button.
5. Press the Mode button to start the power transistor test operation.
(R24537)
3, 4
2, 3, 5
FDMQ, FFQ Series with Wired Remote Controller (BRC1E73)
1. Turn the power on.
2. Set FAN operation using the remote controller.
3. Press and hold
Cancel button for 4 seconds or
longer.
• Test operation will stop automatically after
about 30 minutes.
To stop the operation, press
On/Off button.
4. Select Test Operation in the service settings
menu, then press Menu/OK button.
Basic screen returns and “Test Operation”
is displayed at the bottom.
5. Press On/Off button within 10 seconds.
3 minutes after pressing On/Off button,
power transistor test operation will start.
FDMQ, FFQ Series with Wireless Remote Controller
(BRC082A43, BRC082A41W, BRC082A42W(S))
1. Turn the power on.
3. Press twice. “TEST” is displayed.
2. Press and select FAN operation.
• Test operation will stop automatically after about 30 minutes.
To stop the operation, press .
4. Press within 10 seconds.
3 minutes after pressing , power transistor test operation will start.
Basic screen
2.
3.
Fan
4.
Setting
1/3 Service Settings
Test Operation
Maintenance Contact
Field Settings
Energy Saving Options
Prohibit Function
Min Setpoints Differential
Press Menu/OK button.
5.
Fan
Test Operation
Service Settings
menu screen
Press and hold Cancel
button for 4 seconds or
longer during backlight lit.
Press On/Off button
(within 10 seconds).