Daikin RX-W Series, Service Manual

Page: 229 / 247

SiUS092230EA Field Settings for FDMQ, FFQ Series
Part 7 Trial Operation and Field Settings 223
5.6 MAIN/SUB and Address Setting for Wireless Remote
Controller for FFQ Series
Outline
 If setting multiple wireless remote controllers to operate in one room, perform address setting
for the receiver and the wireless remote controller.
 If using both a wired remote controller and a wireless remote controller with 1 indoor unit,
change the MAIN/SUB switch of the transmitter board.
Transmitter
Board
R7000371
MAIN/SUB switch
When using both a wired and a wireless remote controller for 1 indoor unit, the wired controller
should be set to MAIN. Therefore, set the MAIN/SUB switch (SS1) of the transmitter board to SUB.
Wireless address switch
Set the wireless address setting switch (SS2) on the transmitter board according to the table below.
MAIN SUB
MAIN/SUB setting
switch (SS1)
Unit No. No.1 No.2 No.3
Address setting
switch (SS2)
SS2 SS1
(R24062)
MS
(R24063)
MS
123
(S1935)
123
(S1936)
123
(S1937)