Dahua DHI-NVR5432-EI User Manual Download Page 229

Page: 229 / 471

Figure 5-98 Recording information

5.9 AI

AI detection is to process and analyze the image and extract the key information, and then

compare the key information with the preset detection rule. An alarm is triggered when the

detected behavior matches the detection rule.

The following figures are for reference only and might differ from the actual situation.

5.9.1 Overview

AI detection falls into AI by camera and AI by recorder.

●

AI by camera: Some cameras themselves support AI detection. The cameras perform AI

detection and send the detection results to the NVR for display. When using AI by camera, make

sure to connect the Device to the cameras that support the corresponding AI detection

functions.

●

AI by recorder: The cameras send videos to NVR for detection, analysis and result display.

●

Some models support AI by camera only.

●

The AI functions might vary with models.

●

Different AI functions might conflict with each other. You cannot enable two conflicting AI

functions for the same channel.

User's Manual

215

Summary of Contents for DHI-NVR5432-EI
























































































































































































































































































































































































































































































Search results

Summary of Contents for DHI-NVR5432-EI

Reviews:

Brands by name

Popular brands

Dahua DHI-NVR5432-EI, User Manual

Search results

Summary of Contents for DHI-NVR5432-EI

Reviews:

Brands by name

Popular brands