manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring Global and Interface IP Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 297

D-Link UWS User Manual

IP Statistics

The statistics reported on the IP Statistics page are as specified in RFC 1213. 

To display the page, click 

LAN > Monitoring > L3 Status > IP Statistics 

in the navigation tree. 

Figure 189:  IP Statistics

Note: 

Figure 189

 does not show all of the fields on the page.

Table 173:  IP Statistics Fields

 

Field

Description

IpInReceives

The total number of input datagrams received from interfaces, including 
those received in error. 

IpInHdrErrors

The number of input datagrams discarded due to errors in their IP headers, 
including bad checksums, version number mismatch, other format errors, 
time-to-live exceeded, errors discovered in processing their IP options, etc. 

IpInAddrErrors

The number of input datagrams discarded because the IP address in their IP 
header's destination field was not a valid address to be received at this entity. 
This count includes invalid addresses (e.g., 0.0.0.0) and addresses of 
unsupported Classes (e.g., Class E). For entities which are not IP Gateways and 
therefore do not forward datagrams, this counter includes datagrams 
discarded because the destination address was not a local address. 

IpForwDatagrams

The number of input datagrams for which this entity was not their final IP 
destination, as a result of which an attempt was made to find a route to 
forward them to that final destination. In entities which do not act as IP 
Gateways, this counter includes only those packets which were Source-
Routed via this entity, and the Source-Route option processing was successful. 

IpInUnknownProtos

The number of locally-addressed datagrams received successfully but 
discarded because of an unknown or unsupported protocol. 

IpInDiscards

The number of input IP datagrams for which no problems were encountered 
to prevent their continued processing, but which were discarded (e.g., for lack 
of buffer space). Note that this counter does not include any datagrams 
discarded while awaiting re-assembly. 

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

S&C 6800 Series Instruction Sheet preview
6800 Series
Brand: S&C Pages: 40
HANYOUNG NUX NP100 Manual preview
NP100
Brand: HANYOUNG NUX Pages: 36
HANYOUNG NUX HY Series Instruction Manual preview
HY Series
Brand: HANYOUNG NUX Pages: 4
MADRIX Nebula User Manual preview
Nebula
Brand: MADRIX Pages: 91
MADRIX Nebula Quick Start Manual preview
Nebula
Brand: MADRIX Pages: 40
YASKAWA MP Series Driver Manual preview
MP Series
Brand: YASKAWA Pages: 18
IAI Msep First Step Manual preview
Msep
Brand: IAI Pages: 5
U-Prox IC L Installations preview
IC L
Brand: U-Prox Pages: 3
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
SYCLOPE electronic TRACE'O Installation And Starting Instructions preview
TRACE'O
Brand: SYCLOPE electronic Pages: 40
NXP Semiconductors AN10815 Application Note preview
AN10815
Brand: NXP Semiconductors Pages: 20
Rare Waves Grendel 2TAC Manual preview
Grendel 2TAC
Brand: Rare Waves Pages: 18
TE Connectivity AMP 3K/40 CE 2161600-1 Original Instructions Manual preview
AMP 3K/40 CE 2161600-1
Brand: TE Connectivity Pages: 29
Cypress CY3250-PLC20QFN Quick Start Manual preview
CY3250-PLC20QFN
Brand: Cypress Pages: 2
Parker P3HPA Series Manual preview
P3HPA Series
Brand: Parker Pages: 22
Niko 10-850 Manual preview
10-850
Brand: Niko Pages: 80
Translux Fair-Play MP-50 Series Quick Reference preview
Fair-Play MP-50 Series
Brand: Translux Pages: 20
TA DA 516 Manual preview
DA 516
Brand: TA Pages: 8

Brands by name

Popular brands

Load more brands