manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Port Access Control

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 422

D-Link UWS User Manual

Table 248:  Port Access Control Port Configuration Fields

 

Field

Description

Interface

Selects the Port to configure. 

Control Mode

Defines the port authorization state. The control mode is only set if the link 
status of the port is link up. The possible field values are:

•

Auto: 

Automatically detects the mode of the interface.

•

Force Authorized: 

Places the interface into an authorized state without 

being authenticated. The interface sends and receives normal traffic 
without client port-based authentication.

•

Force Unauthorized: 

Denies the selected interface system access by 

moving the interface into unauthorized state. The switch cannot provide 
authentication services to the client through the interface.

Quiet Period (secs)

Defines the amount of time that the switch remains in the quiet state 
following a failed authentication exchange. The possible field range is 0-
65535. The field value is in seconds. The field default is 60 seconds.

Transmit Period (secs)

Defines the transmit period for the selected port. The transmit period is the 
value, in seconds, of the timer used by the authenticator state machine on the 
specified port to determine when to send an EAPOL EAP Request/Identity 
frame to the supplicant. The transmit period must be a number in the range 
of 1 and 65535. The default value is 30.

Guest VLAN ID

Defines the Guest VLAN ID on the interface. The valid range is 0 to 3965. The 
default value is 0. Enter zero (0) to clear the Guest VLAN ID on the interface.

Guest VLAN Period (secs)

Defines the Guest VLAN period for the selected port. The Guest VLAN period 
is the value, in seconds, of the timer used by the Guest VLAN Authentication. 
The Guest VLAN timeout must be a value in the range of 1 to 300. The default 
value is 90. 

Unauthenticated VLAN ID

Defines the Unauthenticated VLAN ID for the selected port. The valid range is 
0 to 3965. The default value is zero (0). Enter zero (0) to clear the 
Unauthenticated VLAN ID on the interface.

Supplicant Timeout (secs)

Defines the amount of time that lapses before EAP requests are resent to the 
user. The value must be in the range of 1 to 65535 seconds. The value is 30 
seconds. 

Server Timeout (secs)

Defines the amount of time that lapses before the switch resends a request to 
the authentication server. The field value is in seconds. The range is 

1-65535

, 

and the field default is 30 seconds. 

Maximum Requests

Defines the maximum number of times the switch can send an EAP request 
before restarting the authentication process if it does not receive a response. 
The possible field range is 1-10. The field default is 2 retries. 

Reauthentication Period 
(secs)

Indicates the time span in which the selected port is reauthenticated. The field 
value is in seconds. The range is 1 - 65535, and the field default is 3600 
seconds. 

Reauthentication Enabled

Reauthenticates the selected port periodically, when enabled. The default 
value is False. 

Maximum Users

Defines the maximum number of clients that can get authenticated on the 
port in the MAC-based dot1x authentication mode. The range is 1 to 16. The 
default value is 16. 

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Eaton A201 Instruction Leaflet preview
A201
Brand: Eaton Pages: 6
Icar RPC 8BGA Operating Manual preview
RPC 8BGA
Brand: Icar Pages: 40
Icar RPC 8BGA Complete Manual preview
RPC 8BGA
Brand: Icar Pages: 86
Icar RPC 8BGA Instruction Manual preview
RPC 8BGA
Brand: Icar Pages: 39
IDTECK iTDC Troubleshooting Manual preview
iTDC
Brand: IDTECK Pages: 94
Radware Alteon Installation And Maintenance Manual preview
Alteon
Brand: Radware Pages: 98
Tech 21 MIDI MONGOOSE Owner'S Manual preview
MIDI MONGOOSE
Brand: Tech 21 Pages: 2
Wilo AlarmControl 1 Installation And Operating Instructions Manual preview
AlarmControl 1
Brand: Wilo Pages: 128
GIESSE RACK MAX 650 Instruction And Installation Manual preview
RACK MAX 650
Brand: GIESSE Pages: 136
Gantner GAT Access 6600 Series Quick Start Manual preview
GAT Access 6600 Series
Brand: Gantner Pages: 4
Vectornav VN-200 Quick Start Manual preview
VN-200
Brand: Vectornav Pages: 18
Siro 40567 Instruction Manual preview
40567
Brand: Siro Pages: 2
Tapeswitch PSSW Technical Manual preview
PSSW
Brand: Tapeswitch Pages: 2
Magnimage LED-F706 User Manual preview
LED-F706
Brand: Magnimage Pages: 31
IFM DX2011 Manual preview
DX2011
Brand: IFM Pages: 3
Oase StreamMax Pump Controller Operating Instructions Manual preview
StreamMax Pump Controller
Brand: Oase Pages: 142
DELTA DORE TYBOX 1010 WT User Manual preview
TYBOX 1010 WT
Brand: DELTA DORE Pages: 9
ZiLOG S3F8S19 User Manual preview
S3F8S19
Brand: ZiLOG Pages: 23

Brands by name

Popular brands

Load more brands