manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring Advanced Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 635

D-Link UWS User Manual

Table 363

 describes the fields on the 

WIDS Client Configuration

 page.

Table 363:  WIDS Client Configuration

 

Field

Description

Not Present in OUI Database 
Test

This test checks whether the MAC address of the client is from a registered 
manufacturer identified in the OUI database.

Known Client Database Test

This test checks whether the client, which is identified by its MAC address, is 
listed in the Known Client Database and is allowed access to the AP either 
through the Authentication Action of Grant or through the White List global 
action. 
If the client is in the Known Client Database and has an action of Deny, or if 
the action is Global Action and it is globally set to Black List, the client fails 
this test.

Configured Authentication 
Rate Test

This test checks whether the client has exceeded the configured rate for 
transmitting 802.11 authentication requests.

Configured Probe Requests 
Rate Test

This test checks whether the client has exceeded the configured rate for 
transmitting probe requests.

Configured De-Authentication 
Requests Rate Test

This test checks whether the client has exceeded the configured rate for 
transmitting de-authentication requests.

Maximum Authentication 
Failures Test

This test checks whether the client has exceeded the maximum number of 
failed authentications.

Authentication with Unknown 
AP Test

This test checks whether a client in the Known Client database is 
authenticated with an unknown AP.

Client Threat Mitigation

Select enable to send de-authentication messages to clients that are in the 
Known Clients database but are associated with unknown APs. The 
Authentication with Unknown AP Test must also be enabled in order for the 
mitigation to take place.
Select disable to allow clients in the Known Clients database to remain 
authenticated with an unknown AP.

Known Client Database Lookup 
Method

When the switch detects a client on the network it performs a lookup in the 
Known Client database. 
Specify whether the switch should use the local or RADIUS database for these 
lookups.

Known Client Database 
RADIUS Server Name

If the known client database lookup method is RADIUS then this field 
specifies the RADIUS server name.

Rogue Detected Trap Interval

Specify the interval, in seconds, between transmissions of the SNMP trap 
telling the administrator that rogue APs are present in the RF Scan database. 
If you set the value to 0, the trap is never sent.

De-Authentication Requests 
Threshold Interval

Specify the number of seconds an AP should spend counting the de-
authentication messages sent by wireless clients.

De-Authentication Requests 
Threshold Value

If switch receives more than specified messages during the threshold interval 
the test triggers.

Authentication Requests 

Threshold Interval

Specify the number of seconds an AP should spend counting the 

authentication messages sent by wireless clients.

Authentication Requests 
Threshold Value

If switch receives more than specified messages during the threshold interval 
the test triggers.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Balboa Instruments EL Series Hot Sheet preview
EL Series
Brand: Balboa Instruments Pages: 10
Samson 3372 User Manual preview
3372
Brand: Samson Pages: 8
YASKAWA FSDrive-MV1000 Series Instructions For Use Manual preview
FSDrive-MV1000 Series
Brand: YASKAWA Pages: 260
YASKAWA iQpump1000 Installation & Start?Up Manual preview
iQpump1000
Brand: YASKAWA Pages: 114
YASKAWA MOTOMAN FS100 Operator'S Manual preview
MOTOMAN FS100
Brand: YASKAWA Pages: 20
YASKAWA yasnac lx3 Maintenance Manual preview
yasnac lx3
Brand: YASKAWA Pages: 152
YASKAWA MOTOMAN FS100 Option Addendum preview
MOTOMAN FS100
Brand: YASKAWA Pages: 20
YASKAWA MOTOMAN FS100 Instructions Manual preview
MOTOMAN FS100
Brand: YASKAWA Pages: 17
YASKAWA 1000-Series Technical Manual preview
1000-Series
Brand: YASKAWA Pages: 58
YASKAWA J1000 CIMR-JC series Cheat Sheet preview
J1000 CIMR-JC series
Brand: YASKAWA Pages: 2
YASKAWA SI-EP3 Technical Manual preview
SI-EP3
Brand: YASKAWA Pages: 58
S&C IntelliCap Operation preview
IntelliCap
Brand: S&C Pages: 26
Procom DGC-6D Operating Instructions Manual preview
DGC-6D
Brand: Procom Pages: 10
PENKO 1020 CAN-RS232-RS422 MFL Manual preview
1020 CAN-RS232-RS422 MFL
Brand: PENKO Pages: 29
Anilam 4200T CNC Manual preview
4200T CNC
Brand: Anilam Pages: 31
Case IH MAXXUM 100 Service Manual preview
MAXXUM 100
Brand: Case IH Pages: 81
TSM DOUBLER2 Instructions For Installing preview
DOUBLER2
Brand: TSM Pages: 2
Swagelok BSH 10 Series User Manual preview
BSH 10 Series
Brand: Swagelok Pages: 20

Brands by name

Popular brands

Load more brands