D-Link DWL-8600AP User Manual Download Page 103

Page: 103 / 754

Configuring SNTP Settings

D-Link

Unified Wired and Wireless Access System

Oct. 2015

Page 103

D-Link UWS User Manual

• Click

Refresh

to display the latest information from the router.

Time Zone Configuration

Use the Time Zone Configuration page to configure the time zone difference from Coordinated Universal Time
(UTC).

To display the Time Zone Configuration page, click

LAN >

Administration > SNTP



Time Zone Configuration

in the navigation menu.

Figure 34: Time Zone Configuration

• If you change any of the settings on the page, click

Submit

to apply the changes to system.

Address Type

Specifies the address type of the SNTP Server address for the last received valid
packet.

Server Stratum

Specifies the claimed stratum of the server for the last received valid packet.

Reference Clock Id

Specifies the reference clock identifier of the server for the last received valid packet.

Server Mode

Specifies the mode of the server for the last received valid packet.

Unicast Sever Max
Entries

Specifies the maximum number of unicast server entries that can be configured on
this client.

Unicast Server Current
Entries

Specifies the number of current valid unicast server entries configured for this client.

Broadcast Count

Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.

Table 29: Time Zone Configuration Fields

Field

Description

Hours-offset

Set the hours difference from UTC. (Range: -12 to +13)

Minutes-offset

Set the minutes difference from UTC. (Range: 0–59

Zone

Set the acronym of the time zone. (Range: 0–4 characters)

Table 28: Global Status Fields (Cont.)

Field

Description

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DWL-8600AP

Reviews:

Related manuals for DWL-8600AP

Brands by name

Popular brands

D-Link DWL-8600AP, User Manual

Search results

Summary of Contents for DWL-8600AP

Reviews:

Related manuals for DWL-8600AP

Brands by name

Popular brands