manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Basic Setup

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 554

D-Link UWS User Manual

Command Buttons

The page includes the following buttons:

•

Refresh

—Updates the page with the latest information.

RF Scan Sentry

Select this option to allow the radio to operate in sentry mode. 
When the 

RF Scan Sentry 

option is selected, the radio primarily performs dedicated 

RF scanning. The radio passively listens for beacons and traffic exchange between 
clients and other access points but does not accept connections from wireless 
clients. In sentry mode, all VAPs are disabled. Networks that deploy sentry APs or 
radios can detect devices on the network quicker and perform more thorough 
security analysis. 
In this mode, the radio switches from one channel to the next. The length of time 
spent on each channel is controlled by the scan duration. The default scan duration 
is 10 milliseconds.

Supported Channels

This field displays the channels that are supported for the radio mode currently 
selected on the page and for the country configured on the 

Global Wireless Settings

 

page. 

Auto Eligible

Select the 

Auto Eligible

 option beneath each channel to include the channel in the 

automatic channel assignment process. 

Rate Sets

Select the transmission rate sets you want the access point to support and the basic 
rate sets you want the access point to advertise.
Rates are expressed in megabits per second.

Basic

These numbers indicate the data rates that all stations associating with the AP must 
support.

Supported

These numbers indicate rates that the access point supports. You can select multiple 
rates. The AP automatically chooses the most efficient rate based on factors like 
error rates and distance of client stations from the AP.

Forced Roaming

Forced Roaming aims to improve users network experience by forcing a client to 
disassociate with the already associated UAP, where the radio signal strength among 
the client and the UAP is below the configured threshold. After being forcibly 
disassociated with a UAP, the client is ideally going to associate with a nearby UAP 
with stronger signal strength thus improving network experience/performance. 
When is option is selected, forced roaming is enabled. The factory default is disabled

Roaming Threshold

When the signal strength diminishes below a certain threshold, the client will 
disassociate with the access point and re-associate with a nearby access point that 
offers a stronger signal. 
The scale of the signal strength is as follows: -40dBm is considered 100%, while -
90dBm is considered 0%. The valid range is 20(%) to 50(%). The factory default is 

20(%)

Note: 

If you access the Access Point Profile Radio configuration through the 

Radio

 tab for a profile 

from the 

WLAN > Administration > Advanced Configuration > AP Profile 

page, additional fields are 

available for configuration. 

Table 328:  Radio Settings (Cont.)

Field

Description

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Banner SC22-3 Quick Start Manual preview
SC22-3
Brand: Banner Pages: 15
Jands 4PAK Operating Manual preview
4PAK
Brand: Jands Pages: 6
Procom DGC-6D Operating Instructions Manual preview
DGC-6D
Brand: Procom Pages: 10
Mosa EAS 15-806 Use And Maintenance Manual preview
EAS 15-806
Brand: Mosa Pages: 28
Swagelok BSH 10 Series User Manual preview
BSH 10 Series
Brand: Swagelok Pages: 20
Xvent ELEMENTAIR B-MARK I Operation And Installation Instructions Manual preview
ELEMENTAIR B-MARK I
Brand: Xvent Pages: 9
Glitch'd Gaming GG AIO Quick Start Manual preview
GG AIO
Brand: Glitch'd Gaming Pages: 12
Oriental motor ASD10A-K Operating Manual preview
ASD10A-K
Brand: Oriental motor Pages: 52
Opt OPT-DPA1024E-4 Manual preview
OPT-DPA1024E-4
Brand: Opt Pages: 40
MQ Multiquip DCA20SPXU2 Operation And Parts Manual preview
DCA20SPXU2
Brand: MQ Multiquip Pages: 74
YOKOGAWA Revolution FA-M3 R Technical Information preview
Revolution FA-M3 R
Brand: YOKOGAWA Pages: 57
SMC Networks ITV 0 Series Instruction Manual preview
ITV 0 Series
Brand: SMC Networks Pages: 2
Omron R88D-GT series User Manual preview
R88D-GT series
Brand: Omron Pages: 510
ZKTeco Notus Quick Start Manual preview
Notus
Brand: ZKTeco Pages: 13
jbc KNE Instruction Manual preview
KNE
Brand: jbc Pages: 8
Cablematic 192DMX User Manual preview
192DMX
Brand: Cablematic Pages: 6
Parker PAC120 Series Operation Manual preview
PAC120 Series
Brand: Parker Pages: 31
VRG Controls RCVC 3000 Instruction Manual preview
RCVC 3000
Brand: VRG Controls Pages: 39

Brands by name

Popular brands

Load more brands