manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring IGMP Snooping

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 215

D-Link UWS User Manual

Interface Configuration

Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings on specific 
interfaces.

To access the IGMP Snooping Interface Configuration page, click 

LAN > L2 Features

> IGMP Snooping > 

Interface Configuration

 in the navigation tree.

Figure 120:  IGMP Snooping Interface Configuration

• If you make any changes on the page, click 

Submit

 to apply the new settings to the switch.

Table 104:  IGMP Snooping Interface Configuration Fields

 

Field

Description

Interface

Select the physical or LAG interfaces to configure. 

Admin Mode

Select the interface mode for the selected interface for IGMP Snooping for the 
switch from the pulldown menu. The default is disable.

Group Membership Interval

Specify the amount of time you want the switch to wait for a report for a 
particular group on a particular interface before it deletes that interface from 
the group. The valid range is from (2 to 3600) seconds. The default is 260 
seconds.

Max Response Time

Specify the amount of time you want the switch to wait after sending a query 
on an interface because it did not receive a report for a particular group on 
that interface. Enter a value greater or equal to 1 and less than the Group 
Membership Interval in seconds. The default is 10 seconds. The configured 
value must be less than the Group Membership Interval.

Multicast Router Present 
Expiration Time

Specify the amount of time you want the switch to wait to receive a query on 
an interface before removing it from the list of interfaces with multicast 
routers attached. Enter a value between 0 and 3600 seconds. The default is 0 
seconds. A value of zero indicates an infinite timeout; i.e., no expiration.

Fast Leave Admin Mode

Select the Fast Leave mode for the a particular interface from the pulldown 
menu. The default is 

Disable

. Enabling Fast Leave mode allows the switch to 

immediately remove the Layer 2 LAN interface from its forwarding table entry 
upon receiving an IGMP leave message for that multicast group without first 
sending out MAC-based general queries to the interface. 

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

FrSky Taranis Q X7S Manual preview
Taranis Q X7S
Brand: FrSky Pages: 2
Value Point 3500 Quick Start Manual preview
3500
Brand: Value Point Pages: 7
Teledyne Foxy R1 Instruction Manual preview
Foxy R1
Brand: Teledyne Pages: 102
Dungs 273061 Instructions Manual preview
273061
Brand: Dungs Pages: 56
Emec PH CONTROLLER Operating Manual preview
PH CONTROLLER
Brand: Emec Pages: 8
Sunlover SL6 ELITE Quick Start Manual preview
SL6 ELITE
Brand: Sunlover Pages: 2
Vectornav VN-200 Quick Start Manual preview
VN-200
Brand: Vectornav Pages: 18
D-M-E VCTB-4000 User Manual preview
VCTB-4000
Brand: D-M-E Pages: 15
Alcor Micro AU9540 Technical Reference Manual preview
AU9540
Brand: Alcor Micro Pages: 18
Bettis GVO-C Series Operation And Maintenance Manual preview
GVO-C Series
Brand: Bettis Pages: 14
Hubbell Electric Fire Pump Controllers LXi-2400 Specifications preview
Electric Fire Pump Controllers LXi-2400
Brand: Hubbell Pages: 2
Abov A31G213CL2N User Manual preview
A31G213CL2N
Brand: Abov Pages: 8
Atomic SENSORED ESC Instructions preview
SENSORED ESC
Brand: Atomic Pages: 4
Zennio MINiBOX 40 v3 Quick Start Manual preview
MINiBOX 40 v3
Brand: Zennio Pages: 2
DEVI DEVIreg 527 Installation Manual preview
DEVIreg 527
Brand: DEVI Pages: 12
HQ Power VDPCRGB3 User Manual preview
VDPCRGB3
Brand: HQ Power Pages: 26
Paradox Imperial ACM24D Manual preview
Imperial ACM24D
Brand: Paradox Pages: 4
S&S Northern ATWM Installation & Maintenance preview
ATWM
Brand: S&S Northern Pages: 8

Brands by name

Popular brands

Load more brands