manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Monitoring Status and Statistics

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 450

D-Link UWS User Manual

Figure 304:  Switch Status/Statistics

Table  258 on page 446

 describes the fields on the 

Wireless Global Status

 page.

Table 259:  Switch Status/Statistics

Field

Description

Total Access Points

Total number of Managed APs in the database. This value is always equal to the sum 
of Managed Access Points, Connection Failed Access Points, and Discovered Access 
Points. 

Managed Access Points

Number of APs in the managed AP database that are authenticated, configured, and 
have an active connection with the wireless switch.

Discovered Access 
Points

APs that have a connection with the switch, but haven't been completely configured. 
This value includes all managed APs with a Discovered or Authenticated status.

Connection Failed 
Access Points

Number of APs that were previously authenticated and managed, but currently don't 
have connection with the wireless switch.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

ZKTeco F6 Installation Manual preview
F6
Brand: ZKTeco Pages: 2
FASAR ELETTRONICA FE230 Quick Start Manual preview
FE230
Brand: FASAR ELETTRONICA Pages: 2
Faro 33928 Installation Manual preview
33928
Brand: Faro Pages: 3
YASKAWA G7 Series Technical Manual preview
G7 Series
Brand: YASKAWA Pages: 456
B&G ZEUS S Detailed App Manual preview
ZEUS S
Brand: B&G Pages: 19
LAUNDRY SOLUTION SX205100A User Manual preview
SX205100A
Brand: LAUNDRY SOLUTION Pages: 14
DAYLIFF SUNVERTER B Installation & Operating Manual preview
SUNVERTER B
Brand: DAYLIFF Pages: 40
NDS SUNCONTROL2 User Manual preview
SUNCONTROL2
Brand: NDS Pages: 20
Dukane iQ MPC-E Quick Start Manual preview
iQ MPC-E
Brand: Dukane Pages: 30
AUMA PROFOX PF-M100X Manual preview
PROFOX PF-M100X
Brand: AUMA Pages: 56
SUNWIND DR2210N -DDB User Manual preview
DR2210N -DDB
Brand: SUNWIND Pages: 53
Kamado Joe iKAMAND User Manual preview
iKAMAND
Brand: Kamado Joe Pages: 2
NEEDO MY NEEDO User Manual Book preview
MY NEEDO
Brand: NEEDO Pages: 193
Danfoss ADAP-KOOL AK-CC 750 Service Manual preview
ADAP-KOOL AK-CC 750
Brand: Danfoss Pages: 6
Berker 85865100 Operation Instructions preview
85865100
Brand: Berker Pages: 2
Warner Electric CBC-150 Series Installation And Operation Manual preview
CBC-150 Series
Brand: Warner Electric Pages: 4
Licht-Technik Mix4-6 Functional Description preview
Mix4-6
Brand: Licht-Technik Pages: 13
digitalview 417100041-3 Instructions Manual preview
417100041-3
Brand: digitalview Pages: 30

Brands by name

Popular brands

Load more brands