manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Managing the DHCP Server

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 134

D-Link UWS User Manual

Table 49:  Pool Configuration Fields

 

Field

Description

Pool Name

For a user with read/write permission, this field would show names of all the existing 
pools along with an additional option Create. When the user selects Create, another 
text box, Pool Name, appears where the user may enter name for the Pool to be 
created.For a user with read-only permission, this field would show names of the 
existing pools only.

Pool Name

This field appears when the user with read-write permission has selected Create in the 
Drop Down list against Pool Name. Specifies the Name of the Pool to be created. Pool 
Name can be up to 31 characters in length.

Type of Binding

Specifies the type of binding for the pool.

•

Unallocated

: The addresses are not assigned to a client.

•

Dynamic: 

The IP address is automatically assigned to a client by the DHCP server.

•

Manual: 

You statically assign an IP address to a client based on the client’s MAC 

address.

Network Number

If you specify Dynamic as the type of binding, this field appears. Specifies the network 
number (host bits) for a DHCP address of a dynamic pool. For example, if 192.168.5.0 
is the network number and 255.255.255.0 is the network mask (or a prefix length of 
24) for the pool, the IP addresses in the pool range from 192.168.5.1 - 192.168.5.254.

Network Mask

For dynamic bindings, this field specifies the subnet mask for a DHCP address of a 
dynamic pool. You can enter a value in Network Mask 

or

 Prefix Length to specify the 

subnet mask, but do not enter a value in both fields.

Prefix Length

For dynamic bindings, this field specifies the subnet number for a DHCP address of a 
dynamic pool. You can enter a value in Network Mask 

or

 Prefix Length to specify the 

subnet mask, but do not enter a value in both fields. The valid range is 0 to 32.

Client Name

For manual bindings, this field specifies a name for the client to which the DHCP server 
will statically assign an IP address. This field is optional.

Hardware Address

For manual bindings, this field specifies the MAC address of the hardware platform of 
the DHCP client.

Hardware Address 
Type

For manual bindings, this field specifies the protocol of the hardware platform of the 
DHCP client. Valid types are ethernet and ieee802. Default value is ethernet.

Client ID

For manual bindings, this field specifies the Client Identifier for DHCP manual Pool.

Host Number

For manual bindings, this field specifies the IP address to be statically assigned to a 
DHCP client. The host can be set only if at least one among of Client Identifier or 
Hardware Address is specified. Deleting Host would delete Client Name, Client ID, 
Hardware Address for the Manual Pool and set the Pool Type to Unallocated.

Host Mask

For manual bindings, this field specifies the subnet mask to be statically assigned to a 
DHCP client. You can enter a value in Host Mask 

or

 Prefix Length to specify the subnet 

mask, but do not enter a value in both fields. 

Prefix Length

For manual and dynamic bindings, this field specifies the subnet mask for a manual 
binding to a DHCP client. You can enter a value in Network Mask 

or

 Prefix Length to 

specify the subnet mask, but do not enter a value in both fields. The valid range is 
0

 to

 32.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

D-Link DWC-2000 Cli Reference Manual preview
DWC-2000
Brand: D-Link Pages: 113
D-Link DWC-1000 Reference Manual preview
DWC-1000
Brand: D-Link Pages: 146
Davey Torrium 2 TT45 Installation And Operating Instructions Manual preview
Torrium 2 TT45
Brand: Davey Pages: 12
AUMA VARIOMATIC SARV 07.1 Operation Instructions Manual preview
VARIOMATIC SARV 07.1
Brand: AUMA Pages: 32
VALPES ER PLUS Installation Manual preview
ER PLUS
Brand: VALPES Pages: 28
Daktronics All Sport 1600 Series Operation Manual preview
All Sport 1600 Series
Brand: Daktronics Pages: 92
Martin Audio CMX2A Specification Sheet preview
CMX2A
Brand: Martin Audio Pages: 1
Wahlberg 255.700 User Manual preview
255.700
Brand: Wahlberg Pages: 40
VelLight LEDC09 User Manual preview
LEDC09
Brand: VelLight Pages: 44
TA SMS14U Manual preview
SMS14U
Brand: TA Pages: 4
Heinzmann HELENOS V DC 2005DP.2-01 Manual preview
HELENOS V DC 2005DP.2-01
Brand: Heinzmann Pages: 66
MEI 104/DSP Installation Manual preview
104/DSP
Brand: MEI Pages: 199
Madas FRG/2MBC Manual preview
FRG/2MBC
Brand: Madas Pages: 52
Deif AWC 500 Technical Manual preview
AWC 500
Brand: Deif Pages: 12
pleiger 362MC Manual preview
362MC
Brand: pleiger Pages: 59
CSZ EZT-550 Instruction Manual preview
EZT-550
Brand: CSZ Pages: 69
Ametek dunkermotoren 88740.01240 Operation Manual preview
dunkermotoren 88740.01240
Brand: Ametek Pages: 65
Linear Technology LTC1877 Demo Manual preview
LTC1877
Brand: Linear Technology Pages: 9

Brands by name

Popular brands

Load more brands