manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

RADIUS Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 414

D-Link UWS User Manual

Table 243:  RADIUS Server Configuration Fields

 

Field

Description

RADIUS Server Host Address

Use the drop-down menu to select the IP address of the RADIUS server to view 
or configure. Select Add to configure additional RADIUS servers.

Port

Identifies the authentication port the server uses to verify the RADIUS server 
authentication. The port is a UDP port, and the valid range is 1-65535. The 
default port for RADIUS authentication is 1812.

Secret

Shared secret text string used for authenticating and encrypting all RADIUS 
communications between the device and the RADIUS server. This secret must 
match the RADIUS encryption. 

Apply

The Secret will only be applied if this box is checked. If the box is not checked, 
anything entered in the Secret field will have no affect and will not be 
retained. This field is only displayed if the user has READWRITE access.

Primary Server

Sets the selected server to the Primary (Yes) or Secondary (No) server. 
If you configure multiple RADIUS servers with the same RAIDUS Server Name, 
designate one server as the primary and the other(s) as the backup server(s). 
The switch attempts to use the primary server first, and if the primary server 
does not respond, the switch attempts to use one of the backup servers with 
the same RADIUS Server Name.

Message Authenticator

Enable or disable the message authenticator attribute for the selected server.

Domain Name

Specifies whether the domain name automatically attachment mechanism is 
enabled or disabled. The default value is clear (disable).

RADIUS Server Domain Name

Indicates which domain to automatically attach to the captive portal user.
For instance, if 

Domain Name 

checkbox is selected, 

RADIUS Server Domain 

Name

 field is configured as 

example.com

 and the captive portal username is 

test-user

, controller will use 

[email protected] 

as username for Radius 

authentication

Secret Configured

Indicates whether the shared secret for this server has been configured.

Current

Indicates whether the selected RADIUS server is the current server (Yes) or a 
backup server (No).
If more than one RADIUS server is configured with the same name, the switch 
selects one of the servers to be the 

current

 server from the group of servers 

with the same name.
When the switch sends a RADIUS request to the named server, the request is 
directed to the server selected as the current server. Initially the primary 
server is selected as the current server. If the primary server fails, one of the 
other servers becomes the current server. If the primary server is not 
configured, the current server is the most recently configured RADIUS server.

RADIUS Server Name

Shows the RADIUS server name. 
To change the name, enter up to 32 alphanumeric characters. Spaces, 
hyphens, and underscores are also permitted. If you do not assign a name, the 
server is assigned the default name Default-RADIUS-Server. 

Note: 

Configure at least one RADIUS server with the name Default-RADIUS-

Server. Some of the switch features, such as 802.1X, expect the RADIUS server 
to use the default name.
You can use the same name for multiple RADIUS Authentication servers. 

RADIUS clients can use RADIUS servers with the same name as backups for 
each other. 

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Balmar Max Charge MC-624 Installation And Operator'S Manual preview
Max Charge MC-624
Brand: Balmar Pages: 8
Balmar MAX CHARGE MC-614 Installation And Operation Manual preview
MAX CHARGE MC-614
Brand: Balmar Pages: 20
Rain Bird PAR+ES Installation Manual preview
PAR+ES
Brand: Rain Bird Pages: 24
Rain Bird ESP-LXIVM Series Device Installation Manuallines preview
ESP-LXIVM Series
Brand: Rain Bird Pages: 16
Xylem CentriPro Aquavar SOLO Instruction Manual preview
CentriPro Aquavar SOLO
Brand: Xylem Pages: 48
HW Group HWg-SH3 Manual preview
HWg-SH3
Brand: HW Group Pages: 18
National Instruments MXI-Express Gen-3 x16 User Manual preview
MXI-Express Gen-3 x16
Brand: National Instruments Pages: 38
E-T-A EtherNetIP ControlPlex CPC12EN Quick Start Manual preview
EtherNetIP ControlPlex CPC12EN
Brand: E-T-A Pages: 7
Curtis 1232E Manual preview
1232E
Brand: Curtis Pages: 30
LAMBERTI ELEKTRONIK Latherm HZR Comfort Operating Manual preview
Latherm HZR Comfort
Brand: LAMBERTI ELEKTRONIK Pages: 16
3M Touch Screen Controller SX112 Reference Manual preview
Touch Screen Controller SX112
Brand: 3M Pages: 33
W8ZR StationPro II Operating Manual preview
StationPro II
Brand: W8ZR Pages: 77
Wahlberg 255.700 User Manual preview
255.700
Brand: Wahlberg Pages: 40
GAC EEG7000 Manual preview
EEG7000
Brand: GAC Pages: 22
Hall Research Technologies CNT-IP-264 User Manual preview
CNT-IP-264
Brand: Hall Research Technologies Pages: 16
YASKAWA MotionWorks IEC Example Code Manual preview
MotionWorks IEC
Brand: YASKAWA Pages: 21
YOKOGAWA UP350 Instruction Manual preview
UP350
Brand: YOKOGAWA Pages: 96
Festo VPPM Series Operating Instructions Manual preview
VPPM Series
Brand: Festo Pages: 48

Brands by name

Popular brands

Load more brands