manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring Advanced Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 604

D-Link UWS User Manual

Building 3 is the Sales and Marketing building. The Building 3 AP uses a profile called “Marketing.” The 
Marketing AP Profile has three VAPs. The SSIDs for the VAPs are: Sales, Marketing, and Program Management.

If the network administrator adds another AP to Building 2, she assigns the Engineering profile to the AP during 
the AP validation process.

Creating, Copying, and Deleting AP Profiles

From the 

WLAN > Administration > Advanced Configuration > AP Profile >

 

Access Point Profile Summary

 

page, you can create, copy, or delete AP profiles. You can create up to 16 AP profiles on the DWS-4000 Series 
switch. To create a new profile, enter the name of the profile in the 

Profile Name

 field, and then click 

Add

.

Figure 384:  Adding a Profile

After you add the profile, the 

Global Configuration

 page for the profile appears, and a new tab with the name 

of the profile appears a the top of the page. When you add a new profile, it has the default AP settings. 

Figure 385

 shows the layout for AP Profile configuration.

Note: 

It is recommended that in a switch cluster, the profiles should be synchronized on all the 

switches in the cluster in order to get consistent information from the wireless system.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Eaton SC100 Operation Handbook preview
SC100
Brand: Eaton Pages: 86
Salda TPC User Manual preview
TPC
Brand: Salda Pages: 16
H3C WX1800H series Command Reference Manual preview
WX1800H series
Brand: H3C Pages: 27
H3C WX3500H series Installations preview
WX3500H series
Brand: H3C Pages: 4
H3C WX5540H Installation Manual preview
WX5540H
Brand: H3C Pages: 54
H3C LSWM1WCM10 Manual preview
LSWM1WCM10
Brand: H3C Pages: 10
H3C LSQM1WCMB0 Quick Start Manual preview
LSQM1WCMB0
Brand: H3C Pages: 10
Jedia JMA-5104 Operating Instructions Manual preview
JMA-5104
Brand: Jedia Pages: 12
JED Micro T470 User And Installation Manual preview
T470
Brand: JED Micro Pages: 10
JCM Technologies SESAME Rapid Installation Manual preview
SESAME
Brand: JCM Technologies Pages: 2
National Instruments sbRIO-9629 Quick Reference Manual preview
sbRIO-9629
Brand: National Instruments Pages: 2
vacuubrand CVC 3000 Instructions For Assembly preview
CVC 3000
Brand: vacuubrand Pages: 12
Vacon 100 INDUSTRIAL Installation And User Manual preview
100 INDUSTRIAL
Brand: Vacon Pages: 47
Vacon 100 flow Installation Instruction preview
100 flow
Brand: Vacon Pages: 40
Yamaha RCX240 Supporting Supplement Manual preview
RCX240
Brand: Yamaha Pages: 92
Invertek Optidrive Elevator Quick Start Up Manual preview
Optidrive Elevator
Brand: Invertek Pages: 5
Techtrol TLIC Instruction And Programming Manual preview
TLIC
Brand: Techtrol Pages: 4
G&D PersonalWorkplace Pro Video Installation Manual preview
PersonalWorkplace Pro Video
Brand: G&D Pages: 56

Brands by name

Popular brands

Load more brands