Basic Setup
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 569
D-Link UWS User Manual
Valid Access Point Summary
The Wireless Global Configuration page contains a field to select whether to use a local or RADIUS database
for AP Validation. The
Valid Access Point Summary
page contains information about APs configured in the
local database. If the AP Validation is set to RADIUS, information about the APs to be managed by the switch
must be added to the external RADIUS database.
You can add an AP into the local list of Valid APs from the
WLAN > Administration > Basic Setup > Valid AP
tab, as the following figure shows, or you can add an AP from the AP Authentication Failures or Rogue
AP/RF
Scan lists.
Figure 365: Adding a Valid AP
Table 333: Valid Access Point Summary
Field
Description
AP Database
Identifies the total number of APs that have been added to the AP database.
Managed AP
Identifies the number of APs in the database with an AP Mode set to Managed.
Rogue AP
Identifies the number of APs in the database with an AP Mode set to Rogue.
Standalone AP
Identifies the number of APs in the database with an AP Mode set to Standalone.
MAC Address
Enter the MAC address of the AP in this field. When you add the MAC address, you
add the AP to the local database on the switch.
Location
Enter a location to help identify the AP. This field is optional and accepts up to 32
alphanumeric characters, including special characters.
AP Mode
This field displays the current mode of the AP, which can be one of the following:
• Managed
• Standalone
• Rogue
To configure a different mode, click the MAC address of the AP to go to the Valid
Access Point Configuration page.
Summary of Contents for DWL-8600AP
Page 754: ......
