D-Link DWL-8600AP User Manual Download Page 191

Page: 191 / 754

Managing VLANs

D-Link

Unified Wired and Wireless Access System

Oct. 2015

Page 191

D-Link UWS User Manual

To create and configure a protocol group, enter a group ID and click

Submit

. The page refreshes and additional

fields appear.

Figure 100: Protocol Group

• To create or modify a protocol-based VLAN group, edit the fields, and then click

Submit

• To delete an existing protocol-based VLAN group, select the group from the

Group ID

field, and then click

Delete Group

Table 86: Protocol Group Fields

Field

Description

Group ID

Use the drop-down menu to create a new group or to configure the selected protocol
group. You can create up to 128 groups.

Group ID

Identifies the group to configure.

Group Name

Optionally enter a name to associate with protocol group ID. You can modify the name of
an existing group. You can enter up to 16 characters.

VLAN

Specify the VLAN ID to associate with this group. The range is 1-3965.

Protocol-list

Specify one or more protocols to associate with this group. The protocol list can be any
valid comma(,) separated string with standard

arp

ipx

keywords, hexadecimal or

decimal values in the range of 0x0600(1536) to 0xFFFF(65535).

Interfaces

Selects the interface(s) to add or remove from this group. CTRL + click to select multiple
ports.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DWL-8600AP

Reviews:

Related manuals for DWL-8600AP

Brands by name

Popular brands

D-Link DWL-8600AP, User Manual

Search results

Summary of Contents for DWL-8600AP

Reviews:

Related manuals for DWL-8600AP

Brands by name

Popular brands