manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

PoE Status

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 72

D-Link UWS User Manual

Status

Operational status of the port PD detection. The possible values for this field 
are:

•

Disabled: 

Indicates no power being delivered.

•

Requesting Power

: Indicates PoE switch does not have enough power to 

supply power to the requesting powered device.

•

Delivering Power: 

Indicates power is being drawn by device.

•

Fault:

 Indicates a problem with the port

•

Test:

 Indicates port is in test mode

•

Other Fault: 

Indicates port is idle due to error condition

•

Searching:

 Indicates port is not in one of the above states.

Time Range

Time limitation of the port. For more information of the time range, please 
reference the 

LAN > Administration > Time Ranges > Time Range Entry 

Configuration

 page.

POE Operational Mode

Show the operation mode of the port. The possible values are Enabled or 
Disabled

POE Operational Reason

Provides additional information about 

POE Operational Mode

. The reason 

can be one of the following:

•

Admin Mode:

 Operated by Admin Mode

• Time Range - Active: 

Operated by Time Range and the current system time 

is included in the active time period

• Time Range - Inactive: 

Operated by Time Range and the current system 

time is included in the inactive time period. 

Table 8:  PoE Status Fields (Cont.)

Field

Description

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

E-T-A EtherNetIP ControlPlex CPC12EN User Manual preview
EtherNetIP ControlPlex CPC12EN
Brand: E-T-A Pages: 28
OJ Electronics EFR Series Instructions Manual preview
EFR Series
Brand: OJ Electronics Pages: 8
OJ Electronics ETO2 Manual preview
ETO2
Brand: OJ Electronics Pages: 112
OJ EFS Series Instructions Manual preview
EFS Series
Brand: OJ Pages: 17
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Brand: Samson Pages: 6
Rain Bird ESP-RZXe Installation And Operation Manual preview
ESP-RZXe
Brand: Rain Bird Pages: 18
Invertek Optidrive Elevator Quick Start Up Manual preview
Optidrive Elevator
Brand: Invertek Pages: 5
Techtrol TLIC Instruction And Programming Manual preview
TLIC
Brand: Techtrol Pages: 4
Industrial Shields M-DUINO PLUS series User Manual preview
M-DUINO PLUS series
Brand: Industrial Shields Pages: 46
Danfoss AMV 20 SL Operating Manual preview
AMV 20 SL
Brand: Danfoss Pages: 4
Zonex DIGI3U Installation Manual preview
DIGI3U
Brand: Zonex Pages: 16
MIT TRG-BS-12 User Manual preview
TRG-BS-12
Brand: MIT Pages: 20
Powrmatic Eurotrol 2 Installation & User'S Instructions preview
Eurotrol 2
Brand: Powrmatic Pages: 10
NEEDO MY NEEDO User Manual Book preview
MY NEEDO
Brand: NEEDO Pages: 193
Danfoss ADAP-KOOL AK-CC 750 Service Manual preview
ADAP-KOOL AK-CC 750
Brand: Danfoss Pages: 6
Berker 85865100 Operation Instructions preview
85865100
Brand: Berker Pages: 2
ZiLOG S3F8S19 User Manual preview
S3F8S19
Brand: ZiLOG Pages: 23
Native Instruments komplete kontrol s series Manual preview
komplete kontrol s series
Brand: Native Instruments Pages: 338

Brands by name

Popular brands

Load more brands